Thursday, November 24, 2011

Solar Pond, Lake And Trough Aeration

!: Solar Pond, Lake And Trough Aeration

There are solar aeration systems designed to improve not only the aquatic environment but also help to GREEN the environment of this island home, our Earth. Solar aeration systems also improve the aesthetics of your ponds, lakes and troughs, or practically any body of water. The systems diaphragm compressors pump air to the diffusers suspended by floats above the bottom. The circular motion of the bubblers results in total water aeration, circulation and destratification in your lake, pond or trough.

During the summer months, when water is warm, oxygen can be consumed faster than it can be replenished in many bodies of fresh water. Your pond, lake or trough can become "stratified"; the warmer, oxygen-rich upper water laying on top of the cool, more dense upper water laying on top of the cool, more dense, lower-oxygen deeper water. Such conditions inhibit levels of beneficial bacteria and their breakdown of organics in the body of water. Bottom muck accumulation in your water increases and excessive nutrients are readily available for plant/algae growth. This thermal stratification in your water also makes conditions favorable for the production of noxious ammonia and hydrogen sulfide gases.

Solar aeration systems create a vertical current in your body of water using the rising force of small bubbles to entrain, or commonly referred to turn over, the water column. By turning the water over you release harmful gases to the surface where they are released. Your fish are saved from summer kill and winter kill when the water is continuously 24/7 mixed from top to bottom with high oxygen content. This also aids the aerobic bacteria activity, which is very healthy for your aquatic ecosystem. Many people also use solar aeration systems for de-icing their pond, lake or trough.


Solar Pond, Lake And Trough Aeration

Frigidaire Dual Fuel Quiz

Friday, November 18, 2011

Tetra Pond Water Garden Pump 1000 GPH, Ponds 500-1000 Gallons

!: Comparison Tetra Pond Water Garden Pump 1000 GPH, Ponds 500-1000 Gallons quickly

Brand : Tetra | Rate : | Price : $62.18
Post Date : Nov 18, 2011 21:54:05 | Usually ships in 24 hours


  • Magnetic drive water garden pump
  • Powers waterfall, filters, and fountain heads
  • Energy efficient and UL listed
  • For ponds 500 to 1000 gallons

More Specification..!!

Tetra Pond Water Garden Pump 1000 GPH, Ponds 500-1000 Gallons

Wendy Powell On Sale Toddler Drum Set Answer

Tuesday, November 8, 2011

How Do I Set Up A Freshwater Aquarium?

!: How Do I Set Up A Freshwater Aquarium?

Tank Placement

Choose exactly where you would like to place your fish tank; as it will determine what size you purchase, and whether you'll have to have a stand to go with it. 20 gallons and up will require a stand no matter what. As appealing as it is to purchase a small fish tank they actually are not as easy to maintain beneficial water quality. Purchase a 20 gallon fish tank for your starter tank and keep only a few fish. This will help you decide if you enjoy the hobby. Contemplate not subjecting any fish to a "fishbowl". They have a tendency to suffocate the fish either by insufficient oxygen or by their own waste materials. The main things to make note of when selecting the position for your fish tank:
A lot of sun light will result in substantial algae growth and a upkeep problem. An interior wall, clear of bright light, is advisable. It's also crucial that you take into account the ability of the floor to support the load of your fully loaded fish tank. Ensure that there's sufficient structural support under the floor. Select a position close to a power outlet, and bear in mind how far you'll have to carry water for your weekly fish tank maintenance!

Choosing a Fish Tank

Choose a fish tank that will fit the area you've decided on. This is the identical for whatever size aquarium you choose. Also take into account the kind of fish you want to keep, you'll need a fish tank large enough for their adult size. Thinking about live plants? Consider a higher fish tank which will give them the height to grow, but take into account that suitable lighting for various kinds of plants may be pricey (particularly if the fish tank is tall).
Get a fish tank stand that is made for the size of your tank. Search for complete aquarium kits at those big pet retailers. Utilized setups from internet sites like Craigslist tend to be readily available for great prices, be sure that you check for leaks and clean it very well before use. Don't underestimate the load of a full aquarium! Ensure that the stand is either rated for the dimensions of your fish tank or that it's been custom made to be very sturdy. Such things as dressers or T.V. stands aren't robust enough.
If you don't purchase a complete setup, be sure the equipment you pick is rated for the size of your fish tank.
Filtering the tank

Determine which filtration system you intend to use, the most typical and least complicated are either under gravel filters or power filters that hang on the rear of the fish tank. Don't get swept up in technology. Penguin and Whisper power filters provide both mechanized and biological filtration and are simple to clean and use.
Should you decide on an under gravel filter, be sure that the air-pump or powerhead you purchase with it is strong enough for the size of the fish tank. In cases like this, bigger is far better. Remember that in case you don't consistently vacuum the gravel it is going to clog up the under gravel filter and transform it into a killing zone. Remember that you can't make use of an under gravel filter if you are considering having sand or some other fine substrates. The substrates that you use, will be determined by the fish you will keep, and this in turn will help determine the filtration system.
If you opt to go with a power filter, choose one which will move sufficient water for the size of your fish tank. Preferably, it ought to move five gallons of water per hour, per gallon of your fish tank capacity. As an example: a ten gallon. fish tank will need a filtration system that circulates at the very least 50 gallons per hour.
Heating the tank

Make sure you get a heater if one doesn't already come with your fish tank, the fully-submersible types are definitely the simplest to utilize. Look for one with a variable thermostat, given that different fish prefer different temperature ranges. An excellent rule of thumb is 3-5 watts of heat for every gallon of water.

Get Substrate

Pick gravel or sand for the bottom; this is essential for a healthy fish tank (approximately. 2-3 inches). Cheap gravel and sand can be bought from home improvement stores. Sand is ideal for fish that like to dig but it must be stirred regularly to stop dead spots that will create havoc on your fish tank.

Search for leaks

Fill the fish tank with about two inches of water, and then wait for thirty minutes. If there are actually any leaks, it is far better they show up now, instead of when you've filled the whole thing.

Basic Setup

If all is well, open your bags of gravel, and give them a very good wash under running water in a colander. The less dirt in the water, the quicker it'll clear once the filtration system is started up. This phase is particularly crucial if you're using sand rather than gravel.
For undergravel filters, position the filter plate in, and ensure the lift tubes are fitted. (For those who have a submersible power-head, you should only need one; using a traditional air pump, two are ideal for most fish tanks less than 40 gals, one at each end.)
Distribute the rinsed gravel in an even covering over the top of the filter.
Fill the fish tank with water to just underneath the rim of the fish tank, usually a gap of 1" will do.
If you've decided on an external power filter, arrange it on the back of the fish tank in a location in which the outflow will evenly disperse the water. Some aquarium lids have spaces designed for you to place your equipment.
Fill the reservoir of the filtration system with water, and turn it on! Water should smoothly circulate after a few minutes.
Connect your pump air-lines or power-head to the appropriate lift tube(s) now, if you've got an undergravel filter.
Turn on the powerhead/pump. Water should begin moving vertically within the lift tube(s).
Mount your heater on the inside of the fish tank. The majority of the thermostats on new heaters now come pre-set at a suitable temperature range of 70-77 degrees Fahrenheit (21-25 degrees Celsius). Turn on the heater and install your thermometer.
Put in place any plants or decorations. Plants are practical decorations. It is not easy to get mechanical filter handle plankton or algae bloom. Vegetation makes it easy. For a few fish, plants are compulsory. With tall aquariums, position plants with the fish tank only half full, so that you don't have to immerse your whole arm.
Wait for an hour or so, and check that the temperature is still within the safe range, that you have no leaks, and that the water is circulating correctly.
Add the water dechlorinator, in accordance with the directions on the bottle (in case you have not used purified drinking water)
Cycle Your Aquarium The cycling of the aquarium can be done in various ways. One way is to add one or two inexpensive fish, suitable for the water conditions, to the tank, and watch for the amonia and nitrite levels to ensure they don't spike.

Choose Fish

Talk about what sort of fresh water, tropical fish you want to have with the sales person. Enlighten yourself in fish forums on the web about your favorite kind of fish. They ought to give you tips on who can and can't get along, and so forth. Watch out though, some sales staff may not have experience with aquariums and as a result can provide very poor advice. See if there is a locally-owned fish store in the region, they have a tendency to offer the most accurate information and facts as well as high-quality fish.

Adding Fish

Start out with two or three fish the first ten days, then get two or three more, wait another ten days, and so on. If you place too many fish at one time into a new fish tank, the water will not be capable to properly cycle, and will quickly turn harmful. Patience is the key for the first six to eight weeks. That mentioned, a significant error people make is to purchase schooling fish but only get 1 or 2 of them. This is stressful and cruel for the fish. A school implies that a group of 5 is the bare minimum.

Tips
Always research the requirements of any living thing (fish, plant, or invertebrate) going into your fish tank. Make certain they are suitable with what you currently have and that you can satisfy their maintenance needs. It is best to get your information and facts from many sources, don't instantly rely on what the store staff tells you!
Under gravel filters are becoming less and less preferred for a number of factors; they don't perform as effectively as a Hang on back/power filter, they can be noisy, and they will need more upkeep.
If you decide on an under gravel filter, the gravel will need to be vacuumed regularly to get rid of built up organic material. Failure to do this thoroughly can result in excessive ammonia or nitrite levels and fish death.
Over time, valuable microorganisms develop on the surfaces within the aquarium that assist to process ammonia and nitrite. Introducing a large quantity of fish at once can overcome these microorganisms, challenging your filtration system heavily. An aquarium with only a few fish will typically cycle in approximately 30 days, which means the microorganisms will become nicely established and can "keep up" with the fish waste products. Introducing more fish does not speed up this process.
If you are having a challenging time keeping the fish tank clear, think about making use of live plants. They keep the fish tank from getting murky and look good. Just make sure that you purchase them from a pet store so that they won't harm the fish.
5 gallons of water weighs in at nearly 42 lbs. This should help you determine whether or not you have anything that the fish tank will safely sit on. Anything over 15 gallons will almost certainly require a special stand.
If you have a option of light bulb in the light fixture, go with fluorescent - it shows off fish colors much better, and yields much less heat.
Research, research, research!! Try to find out what the conditions of your municipal water are. There are different kinds of fish suited to live in "hard" or "soft" water, and fish living in the correct water conditions will live longer and be more healthy. Unless you are willing to treat all the water going into the tank (can be expensive and/or time consuming), choosing a setup adapted for your local water can really make your life easier!

Warnings
Don't put the tank in or close to a window as this will cause the water to overheat, and also encourage algae to grow. This is not a problem for a fishless tank.
Resist the urge to buy a lot of fish as soon as you set up your tank! The conditions in a recently established aquarium can vary a great deal, which can be fatal to fish.
Real sea shells that you discovered on the beach could be poisonous to your fish - remember this is a fresh water aquarium.
Never clean the tank sides with a spray bottle, and certainly not ammonia.
Compare the rate of staff turnover at the shops available in malls with stores in which you can actually get to know the owners. As that rate descends, the level of quality of information and facts from your staff ascends.
Try to avoid lifting an empty aquarium by its rim - the rim might break or come off, which will endanger the structural integrity of the aquarium. Large aquariums typically require a compression pad underneath.
Some models of heater will become dangerous when they are dry and on.
Under NO Circumstance should you buy fish by how cute they are. That sweet little fish may well be the terror of the seas when it gets bigger.
Think about breeding feeders and danios before you purchase carnivores like cichlids, sharks or oscars.
Pay attention to staff with regards to liveliness. By no means buy fish if they have any sores, spots or other defects.
Do not tap on the glass. The fish will become scared and irritated.
Ammonia, nitrate, and phosphate build-up in a fish tank should tell you to change your water and plant your aquarium. pH (alkalinity) testing is pretty much required. Take in a water sample when you go to the pet store.


How Do I Set Up A Freshwater Aquarium?

Help Small Composters Hint Arco Lamps

Sunday, October 30, 2011

Sunterra 200850 Pond Pump, 850 GPH, Black

!: Saving Sunterra 200850 Pond Pump, 850 GPH, Black quickly


Rate : | Price : $54.02 | Post Date : Oct 31, 2011 01:04:06
Usually ships in 24 hours

The pump is at the heart of a water garden. Without it, water will not circulate to create a healthy and balanced ecosystem. Sunterra pumps circulate water to help prevent breeding conditions for unwanted insects while oxygenating it for plants and fish. Pumps are distinguished by the gallons per hour they produce at one foot of lift or head. All Sunterra pumps are submersible and must be placed in water to function properly. Magnetic Pumps run by electrically charged magnet that causes the impeller to spin and circulate water through the pump. Magnetic drive pumps are environmentally safe, have no coolants and use less energy than direct drive pumps. They have a built in pre-filter and therefore can be used in clean or dirty water applications such as a fountain or pond. This Sunterra Pond Pump has a built in pre-filter to aid inthe water filtration process. Sunterra pumps are 100% water tested, have a 25 foot power cord and a two year limited warranty. This pond pump is 850 gallons per hour and has a 16.4 foot maximum lift.

Price Yamaha E413 Old Gringo Checruda Boots Buy Now

Friday, October 28, 2011

The Importance of Water Pond Filters and Pumps

!: The Importance of Water Pond Filters and Pumps

Water pond filters are very important to any fish pond, most people often only think about the decoration and the surroundings of the pond itself. To maintain a good quality healthy looking pond you need to have water pond filters in place, the ones that can cope with the size and volume of water in order to keep the pond clean and healthy for you're fish to survive. So when you build your fish pond, you must have the correct pump and filter installed, as these two powerful tools do a tremendous job in removing dirt, leaves, fish waste and other debris that cause bacteria and dangerous levels of pH in the water.

There are lots of different types and variations of water pond filters available on market theses days, like for instance backwashing filters, pressure filters, UV filters and bio filters. To know which type that suits your pond the best is to do a little research on the internet and do some consulting it with the experts. Once you've chosen your water pond filters you will also need to choose the best pump, there are two types of pumps that you can use, the ones that are submersible, and the ones that are housed outside the pond, but both types do a fantastic job.

Submersible pumps are often used to generate fountains and other water features as well as feeding the main filter itself. They are very easy to install and operate, and don't need to be primed or anything like that. These types of pumps have a strainer on the inlet side to prevent fish and debris being sucked into the moving parts. External surface pumps are more powerful and are usually a lot larger and more expensive than the submersible types. If you want to pump up to a waterfall of any distance, then you will need to use a surface pump.

When linking your pump to the water pond filters, make sure that they are both compatible with each other and that the capacity of the pump is suitable for the volume of water in your fish pond. You can do this by checking the output of the pump which is given in gallons (or litters) per hour. This terminology can be a little confusing, but a good rule of thumb is to make sure that the pump can circulate all of the pond water through the filter within one to two hours.

If you want the pump to feed a filter and fountain at the same time, then you will need to consider the effect of the water spurting out of the fountain, the greater the maximum head, the higher the water will spray into the air thus reducing the water circulation time. Majority of pond pumps are powered by electricity, and the growing trend towards solar power has lead to an increase of solar powered pumps. But please consider this, most solar powered pumps are only suitable for fountains and smaller water features, and are not suitable for water pond filters.


The Importance of Water Pond Filters and Pumps

Buy Leaf Blower Cfm

Sunday, October 23, 2011

Garden Pond Pumps - Types of Pond Pumps

!: Garden Pond Pumps - Types of Pond Pumps

A lot of pond keepers are finding helpful information online about fish pond pumps. There are plenty of useful sites online that can guide you in purchasing the appropriate pond pump for your garden. In this article, you will learn more about pond pumps.

Are you familiar with the LPH or the GPH? Well, you should be because these abbreviations are very important when determining the performance of the pond pumps. Aside from the abbreviations, you should also know more about head height or head pressure.

The pumps are available in different types. Having a pump is necessary for maintenance. Filtration systems are usually powered by pumps to ensure water circulation within the pond. Each type of pump has its applications and unique features.

1. Magnetic drive pumps - this is the most common; it uses electromagnetism to rotate the impeller and force out the water. This is an efficient system that can save a lot of energy. It is also available in different sizes that can surely fit to your pond.

2. Statuary pump - this is a great pond ornament or small fountain; it has low head pressure and GPH; it can't be used for filters and instead, best suited for indoor display and patio fountains.

3. Direct drive - this is excellent for greater head heights; uses electric motors that turn the pump's impeller with the drive shaft. In requires greater energy and less expensive. This pump uses more electricity and you also need to lubricate it with oil.

4. Submersible pump - this pump can be placed into the pond; this is necessary to ensure that the pump will not overheat since it will be running for twenty four hours. Outdoor activities will not be disrupted since the noise is concealed.

5. External pumps - this is excellent for high head pressure and flow rates; requires less maintenance but are harder to install; this is a bit noisy and you should also protect in when there is power outage.

6. Solid handling or debris handing pumps - this is also a submersible pump but is designed for ponds with large loads of debris; it can prevent damage to the impeller and the water can still be circulated despite the difficult conditions.

7. Fountain pumps - this is recommended for small ponds or water gardens. It is usually sold in kits including a pre-filter, fountain, and water pump.

These are the different types of pond pumps that you can use for your garden pond. Try to compare their good sides and bad sides so that you can pick the ideal fish pond pump that can meet your needs.

So far, the magnetic drive pumps are the most popular, as well as the submersible pumps. Still, it is a matter of personal choice.


Garden Pond Pumps - Types of Pond Pumps

Microboard Cd Duplicator Discounted 1Good Magazines

Wednesday, April 13, 2011

KIT.wmv Sicc HAPPY POND

!: Brand New Hose Water Timers !: Low Cost Rebound Trampoline !: Sizzling Sixteen (Stephanie Plum) by Janet Evanovich

Monday, April 4, 2011

Garden Pond Pumps - Types of Pond Pumps

!: Garden Pond Pumps - Types of Pond Pumps

A lot of pond keepers are finding helpful information online about fish pond pumps. There are plenty of useful sites online that can guide you in purchasing the appropriate pond pump for your garden. In this article, you will learn more about pond pumps.

Are you familiar with the LPH or the GPH? Well, you should be because these abbreviations are very important when determining the performance of the pond pumps. Aside from the abbreviations, you should also know more about head height or head pressure.

The pumps are available in different types. Having a pump is necessary for maintenance. Filtration systems are usually powered by pumps to ensure water circulation within the pond. Each type of pump has its applications and unique features.

1. Magnetic drive pumps - this is the most common; it uses electromagnetism to rotate the impeller and force out the water. This is an efficient system that can save a lot of energy. It is also available in different sizes that can surely fit to your pond.

2. Statuary pump - this is a great pond ornament or small fountain; it has low head pressure and GPH; it can't be used for filters and instead, best suited for indoor display and patio fountains.

3. Direct drive - this is excellent for greater head heights; uses electric motors that turn the pump's impeller with the drive shaft. In requires greater energy and less expensive. This pump uses more electricity and you also need to lubricate it with oil.

4. Submersible pump - this pump can be placed into the pond; this is necessary to ensure that the pump will not overheat since it will be running for twenty four hours. Outdoor activities will not be disrupted since the noise is concealed.

5. External pumps - this is excellent for high head pressure and flow rates; requires less maintenance but are harder to install; this is a bit noisy and you should also protect in when there is power outage.

6. Solid handling or debris handing pumps - this is also a submersible pump but is designed for ponds with large loads of debris; it can prevent damage to the impeller and the water can still be circulated despite the difficult conditions.

7. Fountain pumps - this is recommended for small ponds or water gardens. It is usually sold in kits including a pre-filter, fountain, and water pump.

These are the different types of pond pumps that you can use for your garden pond. Try to compare their good sides and bad sides so that you can pick the ideal fish pond pump that can meet your needs.

So far, the magnetic drive pumps are the most popular, as well as the submersible pumps. Still, it is a matter of personal choice.


Garden Pond Pumps - Types of Pond Pumps

!: Tips Toro Ccr !: Discount Electronic Piano Weighted Keys

Tuesday, March 22, 2011

Beckett 7060310 535 GPH Submersible Pump

!: Price Beckett 7060310 535 GPH Submersible Pump quickly

Brand : Beckett | Rate : | Price : $59.95
Post Date : Mar 22, 2011 12:04:33 | Usually ships in 1-2 business days


  • Water pump for larger ponds up to 535 gallons, small waterfalls, fountains
  • Circulates 535 gph; pumps 500 gph at a 1-foot height for fountains; 12.4-foot total lift
  • Designed for underwater use; direct drive epoxy design for oil-free operation
  • Removable screen inlet for easy cleaning; UL and CSA approved; fish and plant safe
  • Includes 20-foot power cord; 2-year manufacturer warranty

More Specification..!!

Beckett 7060310 535 GPH Submersible Pump

!: Coupon Calvin Klein Nadia Sandal !: Discounted Rain Coats Sale !: Pole Saw Pruner Tips Liver

Friday, March 11, 2011

Pond Water Pumps | | pond pump pond pump

!: Heavy Duty Snow Blower Review !: Discount Frye Engineer


Twitter Facebook Flickr RSS



Français Deutsch Italiano Português
Español 日本語 한국의 中国简体。